The settings windows for my ELAN pad is empty. When I change the registry settings then the entrys are visible, but after restarting windows these settings were reset and th window is empty again. What to do, to prevent these changes?
View 4 Replies
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
I downloaded Windows 10 a few days ago, and every time I turn off my computer and log back in, my mouse settings revert back to their defaults. The defaults have a lot of annoying extra features, and the scroll is backwards. Every time I change the mouse settings to my preferences and apply them, on the next restart they are back to defaults.
How to make my settings permanent? I'm sure once a patch or two for Windows 10 comes in the problem will sort itself out, but in the meantime?
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
Prior to installing Windows 10, I would disable the touchpad on my PC (hate it!) by going to Settings - Mouse Properties - ELAN - Stop Device. Since installing Windows 10, the ELAN device does not show up under devices and I cannot disable.
View 1 RepliesMy question is, does the Windows 10 option to "reset and keep files" repair everything, including any broken registry things that I might have screwed up? I'm not that experienced with this, so could be a silly question.
Some background info: my computer was basically functioning normally, except for some kind of minor issues (slow downs, occasional program crashes, etc) and warnings that kept popping up in my event viewer yet I didn't really "see" the effects of most of them in everyday computer use (I'm an amateur though). This was not virus or malware related, I don't think. (I ran numerous virus scans and also used virus/malware removal, even though it didn't appear I had any, plus I have Avast and MBAM always on my computer.)
So I'm wondering if I probably screwed up the registry because I stupidly used CCleaner's registry clean-up a couple times, and have since learned I should never touch that.
I ran the Dell diagnostics to make sure it wasn't a hardware issue, by the way, and that all passed.
I had Windows 7 and did the upgrade to Windows 10. I just decided to do Windows 10's option to "reset and keep files" to do a clean install to see if that fixes these things. So I'm wondering if the registry is repaired with that kind of reset? And if it never was the registry that was the problem, will the other potential causes be repaired as well? Just want to make sure I made the right choice to reset.
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
My desktop is Dell Inspiron 3647. I have reset my desktop and select keep my file. However, after the reset my computer is unable to restart, and it showed Window cannot restart correctly.
I tried to reset again and try to solve it with the advanced options, however I still unable to restart my computer.
I an trying to run Autoroute on an Asus machine with Win 10 and get a message saying "your registry settings for this application were not copied correctly". This occurs when the program in installed from its original discs or from a new works disc. I think it previously ran OK since upgrading to Win 10 but cannot be 100% certain.
View 4 RepliesSo two things; when I restart my computer my saved and in-use cursor always resets back to the default cursor pack that comes with the system. I had this issue in Windows 8.1 too, but now it's getting on my nerves because I've got to go to the cursor customization panel every time I turn my computer back on for 2 reasons.
The second reason is not one I had in any previous versions. On my laptop touch pad, I always use the invisible scroll bar option on the edge, which you can turn on through the Synaptics settings, which is now found in the same panel I use to change my cursor back.
Is there any way to make these two settings default so I don't have to redo them every single time I turn my computer on?
For the cursors, I download/make individual cursors and customized them, saving the general group in a file I call 'custom cursors', I don't download entire packs. I never have to reload the cursor set I'm trying to use, I just have to pull up the panel and click 'ok' to get back out of it, and this updates me to the custom cursors that were already on there, like the system knew I wanted them, but I just sort of had to remind it to activate them. For the Synaptics issue, I never had the problem before the Windows 10 update and I use the scrolling function a LOT.
I'm using windows 8.1 on ASUS N series laptop 64 bit, my windows got problem and after i updated to windows 10 and try to factory reset it, it got to 99% and say that the window has a problem, it cannot reset my windows and stuck in restart loops.
I've spam F9 and try to reset the pc again, but the problem still persist and i even try to solve it with the advanced options ( startup repair, system restore, system image recovery setting - all end up with this pc require administration account, and somehow my account is lost due to reset earlier) i even try to reinstall windows with CD but it doesn't detected.
It seems like i lost both my windows 8 and windows 10 on the laptop.
I installed (took 8 hours of updating 7 then installing 10) windows 10 and it worked for a few minutes but then I added some software.
Control panel won't work, settings wont work, I cannot uninstall software, I cannot get to reset, restore is turned off (I did not turn it off), safe mode will not work.
Sometimes it will boot sometimes not. No I cannot boot to safe mode when I get logged in, I set boot mode to safe but it did not work.
I want to tool back to 7 but I don't have a disc. If I am forced to stay with 10 how can I reset it? There is no disc.
I have seen this issue before in Windows 7 but this is happening on one of my Windows 10 computers. I want to have my settings set to Adjust for best appearance but when I restart the computer, it'll be set to custom but all of my settings will still have a check mark in the check boxes but not all of them will take affect until I change it back to adjust for best performance which I think is only a couple of options not taking affect.
View 7 RepliesI made the mistake of setting project mode to second display only even though I have no second display on. I had to un/re-plug my monitor to correct it.Ever since it has been booting to the non-existent display, and will spuriously change over.The BIOS loading screens to show but as soon as windows is up, my monitor shows the "no signal" message.Is there a way to hard reset the project mode settings?I corrected the issue by fully uninstalling and reinstalling my graphics drivers.
View 1 RepliesA cumulative update came through and didn't install correctly. The Settings app Update history keeps saying it needs a restart to install correctly.
Reinstalled, no change. I uninstalled the update and Windows Update reapplied it successfully. Now the Update history says two entries for the same update, one that it installed successfully and the previous one is still there saying it needs a restart to finish installing.
Any way to clean up the reporting of the app?
Nothing changed, nothing installed. Edge stopped working, Cortana stopped working. Mail stopped working. SFC scannow found corrupt files but unable to fix.Reset keep files and settings failed to boot and rolled back. As did remove everything.Stuck with a very broken PC that is filling logs with everything stopped working and was closed.Just defender installed.
View 9 RepliesI upgraded to windows 10 today and when I restart my PC, I always get an error issue called rtwlan.
"cannot find device configuration file, load default settings"
Is there anyway to solve this issue and is it related to my wifi drivers?
I ran into this problem while on Win7 & found a fix (YouTube - Apple Keyboard Hack - Fully-powered USB ports on a PC!) . Unfortunately, the YouTube video has been removed. I use an Apple keyboard that has 2-USB ports, one on each side of the keyboard. The power limits for these USBs was 100mA on Win7 so using a mouse is OK. But, if I plug in a USB drive or better yet my Wacom Tablet I get an error stating the power is too low to support. I believe the ports need to be 500mA.
I don't recall exactly how the YouTube author changed the registry key value but he did & I used these 2 USBs without problems for 4 years. I'm having trouble finding the USB location using run / regedit. Below are two screen grabs I used in my post 4 years ago. Windows 10 looks a lot different. Anyway, the USB I need is port 3 hub 7. How to navigate the registry key to that location & edit from 100mA to 500mA.
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesDo I need to reinstall my drivers after resetting my PC?
View 3 RepliesI've recently upgraded to Windows 10 and I'm facing a problem: in the startup one of the HDD is not recognized.. I have to push the reset button and when Windows starts again then the HDD is recognized as normal and everyting goes OK.
But I'm getting tired of this routine.. everytime I need to use the computer I have to make the startup twice.
For more details.. I have Windows installed on a SSD HDD, then I have a SATA HDD and a third IDE HDD which is the one with the recognition problem.. I don't understand why the IDE HDD is not recognized in the first startup...
I found a problem in my pc (Windows 10 Pro 64 bit ver 10586.104 [not insider]) that: When I start up computer, Synaptics startup too, and that what I want, but while playing some game, I have to adjust the resolution lower (HD), and after that, I turn it back to normal (full HD). Therefore, some object in that desktop and taskbar didn't diskplay correctly so I have to restart explore.exe in task manager, but after I restart explorer, synaptics didn't work any more (the icon in the taskbar is disappear,too). (Note: Include can't use 2 finger zooming, rolling, ....) how to start Synaptics back again ? (I can't find where to start Synaptics if it crashed or ended)
View 3 Replies It won't let us access the local disk and says we don't have permission. I am the only user. It won't let us save anything on that disk either. I have gotten all of the documents, videos, and pictures backed up so that's not an issue. We are really just trying to reset the computer with a fresh start but it wont let us.
Resetting the computer- This wouldn't let me because it said it had an error. I did this by holding shift while restarting and then troubleshooting from there. I've tried the option of saving files and also whiping the whole computer, both ways won't work.Booting in safe mode- it works but nothing has come out of doing anything in that mode.
I recently upgraded directly from Windows 8.1 64-bit to Windows 10 and I am having some problem with my Ethernet Adapter. My Ethernet Adapter is a Killer e2200 Gigabit Ethernet Controller, which is built in to my motherboard (MSI Z87M GAMING). When I first installed Windows 10, I found both a software suite and just the drivers themselves on the Killer website. I first tried the whole suite, but it didn't really work very well, felt unnecessary, and basically didn't seem to actually install any drivers. I then used the actual .inf file for my Ethernet Adapter to install manually. I uninstalled the driver and software, and then installed the driver manually through Device Manager by saying "have disk" and navigating to the folder and selecting the .inf file I downloaded. This works, but I have to repeat the process of uninstalling and reinstalling the driver every time I restart Windows.
There are additional variables that could also contribute to the problem. I am using one of those adapters that plug into the electrical outlet to extend the Ethernet line to reach my basement. I don't know if this really should have any effect on my problems, but I figured I should mention it. The product is made by TP-LINK. I also have VPN software on my computer, and part of running the VPN software is having it install a "TAP-Win32 Adapter V9" driver under Network adapters in Device Manager. This could be contributing to my problems, but I do need to have access to my VPN. I did not experience this problem at all under Windows 8.1 using the driver install disc that came with my motherboard.
Basically i lost everything on my external HDD & the only way to get the drive working again was to format it, That fixed the problem the drive was having (Unknown why data got lost) but if i disconnect the drive & reconnect i get message (the drive is inaccessible & corrupted) Something like that cant remember the wording exactly as its not happening right now, but i know the problem will come back & i will once again lose all my data, as its happened 5 times over 2 week period..
If i restart the PC, after startup its the only drive that's not visible either in (This PC), (Disk Management) or in (Device Manager) which leaves me with no option but to disconnect & reconnect the drive in order for it to be visible & Accessible, Now sometimes it works fine but once it becomes inaccessible it stays that way unless i format it Losing all data once again ...
Relevant Information of Drive
3 Years old
On 24/7 (As i never turn PC Off)
Its a Iomega eGo 1Tb External HDD
I Used software Hard Disk Sentinel & it says the drive is Healthy & in good working Condition
I have Windows 10 and I want to factory reset (delete all my files too, FRESH install of windows).
I have a custom build computer, so I do not have a traditional factory reset button in my settings.
I don't have a backup, I forgot to make one however I will make one later!
Specs : [URL]
If I use the Media Creation Tool to do a factory reset (delete all my files), I will get Windows 10 again as a fresh copy, right?
If so does it copy all the drivers or do I have to download and install them again? Or does it do all the work for me and install the latest drivers by itself?
