Performance :: Advanced Settings Saves Until Restart?
Feb 10, 2016
I have seen this issue before in Windows 7 but this is happening on one of my Windows 10 computers. I want to have my settings set to Adjust for best appearance but when I restart the computer, it'll be set to custom but all of my settings will still have a check mark in the check boxes but not all of them will take affect until I change it back to adjust for best performance which I think is only a couple of options not taking affect.
So, I recently upgraded to windows 10, and I was trying to change some settings to do with my mouse, and when I tried to open the additional mouse options: settings>devices>Mouse & Touchpad, but whenever I click "addition mouse options" an error comes up saying "windows cannot access the specified device, path or file. You may not have the appropriate permissions to access them" however, I have administrator access on my computer. This was working before I upgraded to windows 10 (I was on windows 7)
I've had this problem with my razer kraken headset with sound being played back through the mic. My friend has an identical pare that he had the same problem with. To fix it he simply went into Realtek HD Audo Manager and when to device advance settings and checked "Seperate all input jacks as independent input devices" and bam! NO more sound from his end.
I went to check to see if I could do the same and all I found under device advanced settings was playback devices. No recording devices.
I upgraded to Windows 10 everything seems to run fine but system will not restart from the restart selection on the start menu. Windows update will not reboot automatically either. System looks like it is going to reboot, everything shuts down but as system trys to restart everything freezes. Only way around it is to do a hard shutdown by holding the power button. Updated graphics card,hard drive and bios but still no luck.
My computer has suddenly stopped printing PDF downloads from emails. Will only save to documents and still will not print. What is the problem here? Have an HP all in one wireless printer.
A cumulative update came through and didn't install correctly. The Settings app Update history keeps saying it needs a restart to install correctly.
Reinstalled, no change. I uninstalled the update and Windows Update reapplied it successfully. Now the Update history says two entries for the same update, one that it installed successfully and the previous one is still there saying it needs a restart to finish installing.
The settings windows for my ELAN pad is empty. When I change the registry settings then the entrys are visible, but after restarting windows these settings were reset and th window is empty again. What to do, to prevent these changes?
After upgrading from windows 8.1 to windows 10,when i shut down and boot my laptop windows startup pretty fast 8 sec and The login screen appears.However when i restart windows the bot went well it start to be slow in the loading screen with windows logo 10 sec after that a black screen( if i click or move the mouse the cursor appears) 10-15 sec , after that an other clear blue loading screen with a loading circle in the middle, after that the login screen also take a while to login and desktop too take a while to show properly all the icons and task bar.
Since I upgraded from Win 8 to 10, I find that I need to restart my laptop several times a day or else it begins to blank out and flicker and then crash altogether. I recently installed CCcleaner (the free version) to clean the cache and that seemed to work but the problem still comes back, plus all my saved passwords get deleted. I have an HP Envy dv7 with 8 GB of RAM. This PC runs pretty well most of the time but when it begins to slow down and flicker, etc., then the problem starts. I do notice that this happens most often after I have been on the web for a period of time.
Device is up to date, however from either the Start menu or Command prompt Windows freezes at manufacturer splash screen on restart, requiring hard shutdown, This returns even after clean install of Windows 10....
For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.
i want to boot on advance startup option, but everytime i restarted, it just like a normal restart, (settings, recovery then restart) What must be the prblem? i just installed wndows 10 pro.
I cannot get to the advanced boot options menu that I could with windows 7 by hitting the f8 key. You know the menu that has safe mode with Command prompt safe mode with network support startup repair and Just regular safe mode. Use some of those features but I can't get to them the f8 does not work anymore.
I've never liked the concurrent file copy that Windows has had. I drag a season of TV over to a hard drive, drag another season over while that one is copying, and all of them copy slower and slower to all finish at the same time. I'd like a Consecutive copy rather than a Concurrent copy. Seems like a small thing, and rather than installing alternate file management programs (teracopy) I was wondering if there was a slick way to change it natively in WIn10?
In settings I have a large temporary files allocation which says I can delete, I click and it says "We're cleaning up your temporary files. Come back In a bit to checkout the results." I have left it for hours and there is no change. They are taking up a lot of room.
I have gone into settings in my Windows 10 and changed the default music player from groove music to windows media player. But when I click on music files, it automatically starts playing in Groove and NOT windows media player. I have restarted Windows several times with the same results.
I added a registry tweak that unlocked the power option to park the CPU...I am running a PC so battery life or power use is not an issue..just want to be clear about the min and max settings....thought it would be just ON or OFF...its the %s that confuse me....So if i set the min to 100% I assume that turns oof parking completely ?If I set max to 100% this allows the CPU to go to the max it can ? So is the min setting for parking ? and the max to just restrict the max the CPU will run ?If these assumptions are correct....what are the %s in between for ?
Windows 10 file explorer, search,advanced options. I have file contents unchecked. but still get results from within documents-pdf,odt,doc,etc.I have file indexing turned off. How do I just get names of files and folders?
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
I was more than disappointed to find after downloading this major update for Windows 10, that the Mouse settings have still not been addressed. Apparently, this is one of those flaws that will go on and on.
I am using an ASUS Rupublic of Games Laptop with an ELAN Input Device and a Logitech MX Revolution mouse with the latest updated software for that.
Every time I try to boot into safe mode or advanced options I get the same BSOD ERROR: CRITICAL_PROCESS_DIED.. Is there any other way for me to accomplish this?
When I use ASC I keep getting warnings from defender that my system is not protected that I need to download an anti-virus program. Does Defender not know ASC has a virus program in its system?
So this is my 14th or 15th time attempting to disable the driver signature enforcement so I can use motioninjoy to install my PS3 Controller driver to use for Rocket League. However, every time I run advanced startup, the process goes rather slowly before loading up my options. No worries at that point, but when I finally end up at the screen that has the options f1-f9, f7 being the disable driver enforcement, my computer immediately shuts off immediately after loading all of the options. Why it just shuts off... sometimes it shuts off just before it loads all of the options, but I have never been able to disable the driver signature enforcement thus far.
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
A bit of background info: I have installed Windows 10 about 5 times.
The first 4 it would only work until the first reboot because during the setup phase it would automatically install a faulty driver and on the first available restart my Windows would break and I would have to reinstall to get the laptop working again. However all metro apps worked fine before the first reboot.
The 5th time I switched my internet off and window 10 setup finished without internet. That means the faulty driver didn't automatically get installed so I had a chance to switch off the automatic driver installation. However it also meant Windows 10 didn't get activated during the setup phase. I switched internet on, activated Windows 10. Now my computer works fine but all Metro apps are greyed out and not working. For some of them the application crashes and others give me the error "This app can't open". I tried all obvious solutions
sfc /scannow and the DISM commandReinstalling them using: Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}Reinstalling them using PowershellStarting the Application Identity and App Readiness Services and a couple of other random suggestions I saw online. For me nothing has worked. I tried digging deeper and looking at the event logs the error message when trying to open the store is:
Activation of application Microsoft.Getstarted_8wekyb3d8bbwe!App failed with error:
The application cannot be started. Try reinstalling the application to fix the problem. See the Microsoft-Windows-TWinUI/Operational log for additional information.
Looking at the Microsoft-Windows-TWinUI/Operational log:
Activation of the app Microsoft.WindowsStore_8wekyb3d8bbwe!App for the Windows.Launch contract was blocked with error 0x80073CFC because its package is in state: 66.
