Can't Do A Clean Install - After The First Restart Get A Blue Screen

Dec 4, 2015

I’ve got an issue with installing Windows 10 Pro 32bit on my computer where I try to clean install windows, and after the first restart when it’s doing the ‘getting devices ready’ part, I get a blue screen- WHEA_UNCORRECTABLE_ERROR.

A little history on this issue… I started with a clean install of 10 Pro on this computer, installation went fine, computer ran without issue. After installing all available windows updates and Firefox, I plugged in a USB guitar interface device (M-Audio JamLab), and immediately got a blue screen, then the computer restarted… I didn’t catch the error on the blue screen. I unplugged the JamLab device, same issue (pretty sure this is when I first saw the WHEA error code)

I’ve been troubleshooting to the point that I gave up and now I’ve low level formatted the drive and I’m trying to clean install 10 Pro again- same WHEA error code… the most common reasons I’ve seen for this code are incorrect voltages (ex, CPU spike), hardware issues, driver issues or windows updates.

I’ve reset the BIOS back to defaults, I don’t think drivers or windows updates are the issue since I can’t even get Windows installed, and I’ve installed Windows 7 successfully since all this happened (and plugged in the JamLab device/installed drivers successfully), so if it’s a hardware issue then it must be Windows 10 that doesn’t like it.

What baffles me, is that I was able to install 10 and run the computer with no issues, then ever since I plugged in the USB JamLab device, I can’t reinstall it- is it possible that the USB device somehow caused a hardware issue that only Widows 10 is detecting/complaining about?

View 12 Replies


Similar Messages:


Both Upgrade And Clean Install Hangs On Blue Logo

Aug 11, 2015

So I've waited for the notification to say that Windows 10 is ready to install and the installation got stuck on a black screen with a blue windows 10 logo. Now it says my Win 7 is invalid. So I made 2 bootable usb. One using Rufus and another using the Windows 7 USB DVD Download Tool. Same issue occurs with both. I am thinking of installing Windows 8.1 and try to upgrade from there but before I do that.

View 1 Replies

Clean Install Stuck At Blue Logo - No Spinning Circle

Jul 31, 2015

I currently have Win10 32bit. I made a bootable USB and DVD to upgrade to the 64bit version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just the logo. I let it sit for about 4 hours and nothing changes. I've tried many methods but none seem to work.

Core2Duo 3ghz
4069 RAM 560ti video card
1 terabyte HD.
Intel P35 BIOS for P35-DS4 F12
I also have my hard drives partitioned
Legacy mode BIOS

View 1 Replies

BSOD :: Screen Went Blue And Won't Restart At All When Playing Certain Games

Nov 9, 2015

My laptop been having this problem for this many times. While gaming everyday, have BSOD almost everyday. Screen went blue and won't restart at all. have to manually restart the laptop. The DM Log Collector file is attached.

View 1 Replies

Computer Needs To Restart And Then Goes Into Loop Of Restarting From Blue Screen

Feb 28, 2016

On start up I get the computer needs to restart and then goes into the loop of restarting from a blue screen, I can get F2 which is the Bios screen but thats all, I can see reboot on this but do not have anything to reboot with as I upgraded from win 7.

View 4 Replies

BSOD :: OS Crashed And Now Stuck In Restart Loop With Blue Screen?

Aug 11, 2015

Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.

View 9 Replies

Clean Install Reboots At Welcome Screen

Dec 29, 2015

I tried new hardware e.g mobo, PSU

Diff OS win 8 , win 7

Can't get beyond welcome screen then sys reboots

View 1 Replies

Stuck At Loading Screen After Clean Install

Dec 15, 2015

it was time to format and clean install Windows 10 on my PC.

After I deleted my SSD in partition manager (in the windows 10 installation process) and create all new partition for my new install, I installed my windows 10 x64 Home edition and when everything is installed and computer automaticly restarts it won't go further than loading screen... I was waiting for 20+ minutes and nothing (i have good enought pc that I should not wait that much..)

I tried 2-3 clean installes after that and nothing changed (process of installation is normal but when it comes to loading screen after automatic restart - it s(t)ucks..)

When I try to make automatic repair or something like that it says somethink like this partition is locked and it can be done ..

View 1 Replies

Black Screen After Upgrade Not A Clean Install

Sep 15, 2015

So I've upgraded from windows 8 to 10, an upgrade not a clean install. Everything went well except the final part. When it said finishing etc. suddenly a black screen came and an error was shown. All I remember from the error was 'terminate the program'. Soon the error was gone and all I was left with was a black screen and the mouse cursor. Now the black screen comes up after the loading screen (the cursor as well).

View 1 Replies

Black Screen With Non-Flashing Dash After Clean Install On SSD

Nov 12, 2015

When I turn on my laptop, it shows a black screen with non-flashing dash on top left after Lenovo logo. I did the clean install but it didn't work. After that,I tried to clean install Windows 10 on my old HDD and it works! Why my SSD isn't work?

P.S. It can enter the BIOS menu

View 1 Replies

Drivers/Hardware :: No External HDD Or Touch Screen After Clean Install

Jan 1, 2016

I re-installed win10 on my ASUS Q302LA laptop after completely wiping the c: drive using Ubuntu. I installed Ubuntu in order to delete the "Old windows" folder, which apparently can only be done from windows if you have god or "trusted user" status, whatever the hell that is. After installing over Ubuntu using win10 from an iso optical disk, the usb ports and device manager no longer register my seagate external hdd. Now this is scary because the seagate is a "backup" drive and now it's useless. It's still good and works fine with my hp elite so nothing's lost, but the idea that were I not to have a second computer my data would be unaccessible by the very products supposedly designed to keep it safe. The touchscreen feature is also non-functional. I'm not sure whether this is a win10 problem or an ASUS driver problem specific to this computer.

View 1 Replies

Stuck - Install Requires Restart But Doesn't Progress After Restart

Jan 15, 2016

I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.

View 1 Replies

Lenovo ThinkPad S3 Yoga 14 (with NVIDIA 940M) Clean Install - Blank Screen When Maximizing Apps

Aug 12, 2015

I have a new Lenovo ThinkPad Yoga 14 with the NVIDIA 940M discrete graphics option, and after a clean install of Windows 10, maximising pretty much any application results in a blank (and faintly flickering) screen.

I got my unit about a week before Windows 10 was released, and intentionally didn't use it much for that first week. Then, shortly after release, I downloaded Win10 as an ISO using Microsoft's own tools, wrote this to a DVD, then booted the laptop using an external USB drive, carrying out a completely clean install (and blowing away the 8.1 restore partition, which in hindsight might have been a mistake). I allowed Win10 to install all drivers, then went to the Lenovo site for anything missing. End result is that pretty much any application (excluding the Edge browser) blanks the screen when maximised.

After that, I went back to 8.1 - again with a clean install due to no longer having a restore partition, and documented the steps taken this time:

Installed 8.1 from downloaded ISO written to DVD, via USB DVD drive
Ensured unit was offline
Installed latest Intel HD Graphics 5500 drivers 6.16.00.3174
Tested maximising applications, no issues
For each of the last three releases of the NVIDIA drivers (in case there was a problem with a particular release), being 352.30, 353.30, and 353.62:
> Installed the driver

[Code] ....

End result is a fully working 8.1 install - no problem with maximising applications.

I then disconnected from the network and did an in-place upgrade to Windows 10, again documenting the steps taken:

Immediately after installation, there were no Intel drivers and no NVIDIA drivers installed
Display was using Microsoft Basic Display Adapter only
Maximising an app instantly blanked the screen - interesting given the lack of vendor-specific display drivers installed at this point...
Connected laptop to network again and allowed Win10 to install all updates (including drivers)
On restarting, drivers were automatically present for Intel HD Graphics 5500 and NVIDIA 940M
Testing maximising an application again blanked the screen
As a test, the 940M was disabled via device manager and all GeForce drivers uninstalled
Testing maximising an application again blanked the screen

I've tried a further Windows 10 clean install since the above, but with the same result - doesn't seem to matter regarding the installation order of drivers, etc, or if I manually download these vs letting Win10 or Lenovo's system update application install them...

Plugging in an external display via HDMI shows no such issues, e.g. maximising applications is fine. If the display is mirrored, the internal screen still flickers with maximised applications.

On talking to Lenovo support yesterday, the response was that this "is a Windows 10 problem" and that I "should contact Microsoft" for a resolution...

I know I can go back to a clean Win8.1 install, but would much rather be on Win10.

View 1 Replies

PC Gets Blue Screens And Restart Loops

Dec 18, 2015

So today i suddenly got a bluescreen but thought it wasn't anything special so I continued using my pc.

A few hours later my PC shut down and when I try to turn it on it either instantly reboots after i get to the login screen. When it restarts it has had these messages:

attempted execute of noexecute memory ntfs sys
IRQL_NOT_LESS_OR_EQUAL

Windows 10

View 1 Replies

Clean Install Recommended After Upgrade From Clean Windows 8.1 Pro Installation?

Sep 2, 2015

I have a new rig and made a clean install with Win 8.1 Pro.

After that I directly upgraded to Win 10 Pro within running system.

Are there any advantages to do now a clean Windows 10 installation?

View 1 Replies

Install Chipset After Clean Install

Aug 3, 2015

My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.

View 1 Replies

Can't Login / Flashing Between Lock Screen And Blue Screen

Aug 12, 2015

I upgraded from Windows 8 to 10 without a hitch an hour ago and kept all of my personal files and apps. I set up my start menu and everything was working fine, but I wanted to change the image on the logon screen (or whatever you call the screen in between the lock screen and the screen where you enter your PIN/info). So I took a risk and downloaded the 3rd party app here:

[URL] and uploaded an image and hit apply. Of course right after doing that I went to lock my PC to see if it worked, and as you can tell... it didn't.

I've tried rebooting and it hasn't worked. It's just very rapidly flashing between a blue screen w/ a loading circle and my lock screen image.

View 5 Replies

Apps :: Install Window Pops Up On Every Restart?

Dec 20, 2015

This window trying to install HP Support Assistant pops up every time I restart my laptop, but, only since I have upgraded to Windows 10.

I uninstalled and reinstalled the HP Support Assistant and I can pull it up, and it is running right now. I've tried MSCONFIG, and CCLEANER and cannot find any "run on startup" that might be doing this.

View 3 Replies

How To Do Clean Install On New SSD

Dec 22, 2015

How can I clean install windows 10 on a new SSD, saving the fact that I had original windows (that was purchased built in with the laptop)? Do I need to find the CD key?I have a generic one as I upgraded to windows 10 for free (or are all windows 10 have generic CD keys?).How can I use my Windows licence on a new SSD?

View 1 Replies

Settings App Update History Keeps Saying It Needs A Restart To Install Correctly

Nov 28, 2015

A cumulative update came through and didn't install correctly. The Settings app Update history keeps saying it needs a restart to install correctly.

Reinstalled, no change. I uninstalled the update and Windows Update reapplied it successfully. Now the Update history says two entries for the same update, one that it installed successfully and the previous one is still there saying it needs a restart to finish installing.

Any way to clean up the reporting of the app?

View 1 Replies

How To Downgrade To Win 7 After Clean Install

Aug 2, 2015

Mine was with Win 7. This was done few years back throughWin7 upgrade disk. I have this Win 7 upgrade disk and COA for it. (Bought from Amazon).... Can I revert back to Win 7.....

View 3 Replies

Installation :: How To Do Clean Install From DVD

Dec 25, 2015

My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?

View 2 Replies

Installation :: Clean Install On A New SSD

Dec 4, 2015

I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.

View 6 Replies

Installation :: Able To Do A Clean Install

Jul 14, 2015

All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?

View 6 Replies

No Product Key After Clean Install

Aug 12, 2015

My PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.

View 19 Replies

How To Do Clean Install After PC Upgrade

Aug 17, 2015

I had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.

However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved