I have to set up log shipping from Prod server "A" to 2 different DR servers ("B" and "C")...What do i have to do differently (or additional) using the GUI (ie not using Tsql Scripts) to accomplish this, in addition to the steps that are done to log ship to just one DR server?
View 0 RepliesIs there any way I can deny connection from SSMS only from remote servers?
View 7 Replies View RelatedIf you write a query that outputs XML, you'll have a long string in the Results window/tab that is also a link. Clicking on this link opens a new tab in SSMS with the formatted XML string easier to read.
My issue is that clicking on the link opens the "formatted XML string" tab ON THE SAME tab as my code and no way to go back to my code after that ... I need to reload the query from disk, if saved, to erase the "formatted XML" window.
Hello,
On a windows 2003 server R2 x64, i had the Framework.net 3.5, Sql Server 2005 express (instance s423553 on NT SERVICENetwork) and Visual Web Developper 2008.
I installed Sql Server Express 2008 Express (install .SQLexpress with the local account sqlserv10). The first time (with the account NTSERVICENetwork), it failed. I uninstalled it and Sql Server Management Studio 2005. The second time, the install end properly. But, can't find SSMS. On a MsSql2008 microsoft page, i've found a link for SSMS 2005. So i installed it.
But, on this server, Sql Server Management Studio Express 2005 does not work with Sql Server 2008. I tried to use the 2008 Instance with Visual Web Developper 2008 but it didn't work (only compatible with sql server 2000, 2005....).
Could you help me please ?
Thank you.
When I execute the following command, I get the output truncated to 79 characters, including three dots (as an ellipsis, I suppose).
EXEC master..xp_cmdshell 'powershell.exe "Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255"'When I execute the core command directly in Powershell, whether the text or ISE version, it works correctly, with or without the out-string -width command.
Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255What does it take to get SSMS to not truncate my output strings?
I have a specific requirement. I need to insert the DML statements executed from Management Studio into a SQL table. We have SQL Server 2008 R2 and 2012 instances.
View 8 Replies View Relatedis there a way to see the data of a table variable in the SSMS debugger? For example, if I set a breakpoint in SSMS and look at a populated table variable named @MyTable in the Locals tab at the bottom of the IDE, a value of "(table)" is displayed. There does not appear to be a way to expand or drill into this variable in the debugger to see the data. Do you know if there's a way to do this through the debugger or do you use an alternate approach when using the SSMS debugger?
View 1 Replies View RelatedI would like to view the previous executed query error message in SSMS. Is there any way to view the query execution error messages history in SSMS?
View 2 Replies View RelatedSQL Server 2012 Replication. The command prompt instance of the replication is being run as the same user as the SSMS "version" using the runas option. With SSMS the error is that the client is missing a privilege. There is no error when it runs from the command prompt. All runs well.
We have reinstalled the replication feature.We have gone through several MSDN articles that indicate exactly what privileges (both within the DB and in Windows) that service account should have. None have worked Incidentally, when I create a new publication and indicate that the SQL Server Agent be used , the publication runs.
Because of a performance problem, somebody has given me a script which came from a SSRS report.
The code as supplied does not work when multivalued parameters are used.
Testing/tuning/building in SSMS is far superiour than in SSRS. So that's why I like to use SSRS for building the code/script/sql-statement.
Offcourse parameters have to be set correctly. (That is no problem).
Splitting of the multivalued parameter is not a problem either.
When I go to open a file in SSMS, the Open File dialog box appears. In the left side of that box, there is a panel containing shortcuts to various locations: Desktop, My Projects, and My Computer. I would like to add some shortcuts to folder that I use in this area, but I haven't been able to figure out how. how to do this?
View 9 Replies View RelatedI have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.
What are the steps needed to setup TDE which are involved with log-shipping.
I'm trying to quantify the number of times folks use SQL Server Management Studio to change client data in one of our production databases. Does SQL Server keep this statistic? How do I get to this data?
View 6 Replies View Relatedi'm writing below this code..
exec msdb..sp_send_dbmail
@profile_name = 'local',@recipients='chintu@www.com'
, @subject ='Log Shipping Job succeeded'
, @QUERY = 'exec sp_executesql @stmt=N'exec sp_help_log_shipping_monitor',@params=N'
I want Log shipping Status Through Mail. Last back up transaction in the day and last restoration trn file in the day...
We have log shipping for databases from production to back office (BO) environments for users to run reports. In preparation for moving a back office environment to a different server, we want to setup an addition log shipping environment, let’s call it BO2, same as the BO. One of the challenges we had was the amount of time it would take to get the full backup from production to BO2 due to the size of the database. It would take days just to transfer the full backup.
Solution:Let’s just say the database being logged shipped is DB123. Instead of using the full backup of DB123 from production, we use the mdf and ldf of DB123 from current log shipped database on the BO to setup the additional log shipping on BO2.
Steps:1.Setup the directory structure for the undo file (tuf) on the BO2 server same as the BO server.
Note: The undo can be moved to different drive after the log shipping is setup.
2.Stop SQL services on the BO server.
3.Copy the undo file (tuf), mdf, and ldf files of the log shipped database, DB123, from server BO to server BO2.
Note: Keep these files as main copies because they will be used multiple times. Do NOT copy files to where you’ll put the new database files.
4.After the files are copied, start SQL services on BO.
5.On the BO2 server, create an empty database DB123 with database name, file_id, logical names, physical names exactly the same as the ones on the BO server.
Note: Make the size of mdf and ldf small so it doesn’t take long to create the database.
6.Stop SQL Services on the BO2 server.
7.Overwrite the new mdf and ldf files of the empty database DB123 with the mdf and ldf files that were copied over from BO.
8.Start SQL services on BO2.
Note: If the file_id, logical names and physical names are not matching up, the database will be in suspect mode.
9.Do a backup of DB123 with COPY_ONLY.
10.Drop DB123 on BO2 after backup is complete.
11.Use the full backup from previous step to setup log shipping of DB123 on BO2.
Note: Below was the LiteSpeed syntax that was used
exec master.dbo.xp_restore_database @database = N'DB123' ,
@filename = N'F:SQL BackupsDB123_FULL.slsfull',
@filenumber = 1,@with = N'STATS = 10',
@with = N'STANDBY = N''C: MSSQLDataROLLBACK_UNDO_DB123.trn''',
@affinity = 0,@logging = 0
12.Stop SQL services on BO2.
13.Again, overwrite the mdf, ldf and undo file (tuf) of DB123 on server BO2 with mdf, ldf, and undo file (tuf) from BO.
14.Start SQL services on BO2.
15.Replay transaction log from PRD
Note: You can change the location of the undo file by copy the current undo file to the new location and point to new location in “STANDBY” parameter. DO NOT do cut and paste of undo file but do copy and paste.
It works on Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) . I have not tried it on SQL Server 2012 yet.
In steps that stop/start SQL services, you can bring the database offline/online.
In a way, this is doing detach/attach a log shipped database.
When trying to open the log shipping status report, I get an error: user must be in the master database. The jobs appear to be running correctly.
View 0 Replies View RelatedCurrently we run log shipping to a standby server located at the same site as the production. We currently move the 2 most important databases every 5 minutes. Everything works fine. We are now being asked to also create a standby server at remote site (we should have a high speed connection to this site). Is it possible or has anyone tried to do log shipping to 2 different servers? Can you log ship from a prod server - to a standby server - and then from there to another stand-by server?
View 3 Replies View RelatedI have a solution where I have 3 servers to setup in a log shipping environment. The primary and first failover are located at the same location. The 3rd failover is across a slow LAN link. Haven't done it, but inside the wizard can you designate more than 1 server. Also, I have seen back and forth arguments over where the log shipping monitor should reside. With the budget I can't afford a box to just sit there and run the log shipping. Would i be better off putting the log shipping monitor on the standby server that is located at the facility? We have one client where I have the log shipping running on the primary, and the performance impact is non-exsistent.
View 3 Replies View RelatedI've been put in a situation where I have a number of SQL DB's running on 2005/2008 which I have responsibility for. I've been given limited information so am looking at a starting point to determine where I go from here.
I have of course ensured there is a backup strategy in place to secure the data.
I have an SSIS job that dynamically loops through each server, grabbing data for typical DBA reporting, like diskspace, and errorlogs. If the server is down for whatever reason the SSIS package fails. Is there any way I can prevent the SSIS package from failing if one of the servers is down?
View 1 Replies View Relatedi have 70 SQL database servers and i setup DB Mail on the 70 Servers, i want to know is there a way to find the status of all the jobs which i assigned the DB Mail and if its working/failing... is there a script i can run on powershell or SQL to find out that information
View 1 Replies View RelatedBelow is the syntax I am using for creating Linked server from SQL Server i.e windows 2008 R2 standard to Postresql database running on Linux 32 bit Debian (Linux turtle 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686 GNU/Linux) and the version of Postresql is 8.3
/****** Object: LinkedServer [HGCDEV] Script Date: 09/15/2015 17:03:37 ******/
EXEC master.dbo.sp_addlinkedserver @server = N'HGCDEV', @srvproduct=N'', @provider=N'MSDASQL', @datasrc=N'172.16.20.159',@provstr=N'UID=web;PWD=dev123'
/* For security reasons the linked server remote logins password is changed with ######## */
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'HGCDEV',@useself=N'False',@locallogin=NULL,@rmtuser='web',@rmtpassword='dev123'
This the error I am getting " Cannot initializee the data source object of OLE DB provider "MSDASQL" for linked server "HGCDEV".
How to setup the linked server........... Below are the drivers installed on the SQL server
PostgreSQL35W
PostgreSQL30
I have the default trace on a SQL Server 2008R2 instance enabled and found today that there is a gap of nearly 4 minutes in the trace during a time of the day when there most certainly is not going to be a 4 minute window of nothing.
What if anything could cause the default trace to have a gap like this? The SQL Server Instance (against my preferences) is hosted on VMware however it has its on HOST and so its resources are not being shared with any other server. The data & log files reside on different parts of the SANS. Our IT & Network admins are looking into the issue on their end but when I looked and found a near 4 minute gap in the default trace it hit me that this could be something above/outside of SQL Server.
I am having trouble finding any documentation on how linked servers are set-up under SQL 2005 for log-shipping and replication. Under SQL 2000, the only linked servers "visible" were ones that were user-defined. Under SQL 2005, it seems when you set-up log-shipping or replication, you get these new linked servers which are automatically defined. I would like to understand them and in particular, how security is maintained. We recently had a production issue where after some problem with a server which resulted in having to restart SQL Server, and shrink msdb, log-shipping started to fail authentication when trying to run alert jobs. Only after rebooting the server, and also the log-ship target server, and waiting 9 hours, did the authentication correct itself. I would like to know how it resolved itself and what took so long?
View 3 Replies View RelatedIs there anyway,can we find the list of servers by querying at active directory?
View 3 Replies View Relatedhow best to approach a problem involving two tables across two different servers.
Table 1: Contains IP Address along with assessment findings. Lets say the fields are IPADDRESSSTR, FINDING
Table 2: Contains Subnet information stored in integer format. The fields are SITE_ID, LOW, and HIGH
What I'd like to do is load the IP range information into memory and then return the findings from table 1 where the IPADDRESSSTR is between the LOW and HIGH integer value.
1) Is there a way to load all of the ranges from table 2 into an array and then compare all the IP addresses (IPADDRESSSTR) from table 1?
2) How do I convert IPADDRESSSTR (a string) to an integer to perform the comparison.
Have installed SQL 2008 on Windows 2008 and have come across a strange issue.
When connecting to the Report Server cvia SSMS to enable "My Reports" (for example) the Report Server Properties are greyed out and we cannot alter them. This occurs when logged on both locally & remotely to the Win 2008 server.
Interestingly, we have another (XP Pro) box with SQL 2008 on it. If we connect to the Win 2008 SQL report server from the XP machine's SSMS, then we have full control and can access and change the report server properties on the Win 2008 server.
The relevant domain accounts are in the Admin group on the Win 2008 server and the XP Server so we are confused as to why we cannot edit the Win 2008 report server properties locally.
I recently enabled log shipping on our production database, and I had initially accepted the default of 72 hours to delete copied logs. Well, i am running out of space quick, and I need to edit it to something like 6 hours.
When I try to disable log shipping in order to recreate it, or if I try to edit the secondary server settings when I am logged in as SA, or my windows account which has the sysadmin role assigned, I get an error that says:
Only members of the sysadmin fixed server role can perform this operation. Error 21089.
I've restarted the sql service, disabled and enabled the permission on my account, but for the life of me, i cannot get this to work!
I am trying to import an xlsx spreadsheet into a sql 2008 r2 database using the SSMS Import Wizard. When pointed to the spreadsheet ("choose a data source") the Import Wizard returns this error:
"The operation could not be completed" The Microsoft ACE.OLEDB.12.0 provider is not registered on the local machine (System.Data)
How can I address that issue? (e.g. Where is this provider and how do I install it?)
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
Is there any way to use SQL Server Management Studio to manage a 7.0 database? I have a few old databases still in 7.0 and would really like to manage them through SMSS. Am I out of luck?
Thanks!
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim