Transact SQL :: Case Statement In Where Clause - Select First / Default Value If Two Different Value Exists
Nov 16, 2015
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store Type Sales
11 A 1000
23 A 1980
23 B 50
5 B 560
I want to filter the store in "where clause" where
1)- if the store has type A and B, then assign only A
2)- if the store has type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type
from table1
where (TYPE]= (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
View 7 Replies
ADVERTISEMENT
Jun 4, 2015
I have used the below update query. However, its updating only the first value. Like its updating AB with volume when c.Type = ABC, similarly for CD. Its not updating based on the 2nd or the next case condition.
Update XYZ Set AB = a.Amt * (CASE WHEN c.Type = 'ABC' THEN (c.volume)
WHEN c.TYPE = 'DEF' THEN (c.volume)
WHEN c.Type = 'GHI' THEN (c.volume)
Else 0
END),
CD = CASE WHEN c.Type = 'MARGIN' THEN '4105.31'
WHEN c.Type = 'ABC' THEN '123.1'
WHEN c.Type = 'DEF' THEN '234.2'
WHEN c.Type = 'GHI' THEN '567.1'
END
from table1 a join table2 b
on a.Cust = b.Customer
join table3 c
on b.account = c.account and b.channel =c.channel
Why its not working properly? But if i use Select statement instead of update query its working properly.
View 18 Replies
View Related
Aug 10, 2006
I am fairly new with SQL and still learning. I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me. Here is the code I have so far:
SELECT
l.loanid,
p.investorid,
l.duedate,
case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate,
pc.interestrate
FROM loan l
inner join participation p on p.loanid = l.loanid
inner join paymentchange pc on pc.loanid = l.loanid
where p.investorid = '12345' and RateDueDate is not null
order by l.loanid, pc.duedate
I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table. Any help would be greatly appreciated.
Thanks!
View 6 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Nov 6, 2015
below is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
View 5 Replies
View Related
May 18, 2015
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
View 2 Replies
View Related
Jul 9, 2015
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID
FROM tblGRNItem
INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp
WHERE tblGRNItem.DateCreated BETWEEN
(SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
[code]....
View 6 Replies
View Related
Nov 6, 2015
I have a scenario where the End User is going to select two parameters. @AgentID and @Location If the End User selects @AgentID parameter, in my WHERE clause, I do not want to check the location condition. By default, the agent knows their location already.
If the End User select @Location parameter, in my WHERE clause, I still want to check the Agent condition.
@AgentID parameter would populate either with "All" or their actual agent# (76754 for example).
@Location parameter would populate either with "All" or their actual location (Birmingham or Bessemer for example)Sample of my current WHERE clause:
WHERE
gl.ReceiptDate >= @BeginDate and gl.ReceiptDate < DATEADD(D,1,@EndDate)
AND gl.AgentId = CASE WHEN @AgentID = 'All' THEN gl.AgentID ELSE @AgentID END
AND gl.Location = @Location
View 9 Replies
View Related
Jan 22, 2007
I need a SQL statement that selects a specific year (@yr type int) in the "createddate" column...if this @yr is equal to 0 then I want to select ALL columns regardless of the year...This is what I have so far, but it doesnt work...SELECT * FROM tblUsersWHERE year(CreatedDate)=CASEWHEN @yr<>'0' THEN @yrELSE NOT NULLEND
View 1 Replies
View Related
Oct 3, 2007
Hi!I want to make search engine and I have problem with query for this search. User can write username to search or text to search or both. So at first I made query for each event individually: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int
AS
DECLARE @date DATETIME
SET @date = DATEADD(day,@days,GETDATE())
IF @username IS NOT NULL AND @search_text IS NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (dbo.aspnet_Users.UserName = @username) AND (forum_topics_1.post_current_date >= @date)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%')
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NOT NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%') AND
(dbo.aspnet_Users.UserName = @username)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
RETURN This 3 queries are different only by Having clause. So I want to put If/Case in Having clause, but I have problem. Can anyone help me?Also I want to make paging from SQL level, so if anyone will be so helpful and make working this query with this: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int,
@page int,
@page_size int
AS
WITH Results As
(
//QUERY)
)
SELECT * FROM Results
WHERE RowNumber BETWEEN (@page_size * @page + 1) AND (@page_size * (@page + 1))
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
RETURN I will be grateful :-)
View 5 Replies
View Related
Feb 21, 2008
Hi,
I need help to use CASE Statement within my WHERE Clause. I want to change the WHERE Clause based on my condition as following:
SELECT ...
FROM ...
WHERE (condition)
AND (condition)
AND (condition)
AND (
CASE Table.Category
WHEN 'Drinks' THEN
Table1.Field1 = 1 -- Problem line
ELSE
Table1.Field1 = 1 AND Table1.Field2 = 1 -- Problem line
END
)
In the above case, my WHERE Clause is dependent on one of the fields in a table. If it has a certain value then only Table1.Field1 is used otherwise Table1.Field1 & Field2 come into action.
I am getting error on the mentioned line (Problem Line). Since CASE is an expression and does not execute a statement, can anyone help me to get my WHERE Clause working...
Thanks in advance...
View 3 Replies
View Related
Aug 13, 2003
can i use case statement in where clause.
The scenario is as follow
declare @param int
select
*
from
table1
where
column1 = 'asdf'
column2= @param
In the above sql, if @param is '' then i don't want to include it in the where clause.I can use "like" statement for that, but i want exact value not partial value.
can i use case in where clause so that if @param is '' then i will not include in the where clause
View 10 Replies
View Related
Apr 7, 2006
Can I do the following? Keep getting an error stopping at the first < of the where clause.
declare @mon as int, @yr as int, @myDate as varChar(20)
set @yr=2006
set @mon=1
set @mydate='01/31/2006 23:59:59'
select 0 as DTAP, 0 as DT, 0 as TD, 0 as HIB, 0 as IPV, 0 as MMR, 0 as HEPB, 0 as _VAR, count(v.procedureKey) as FLU, 0 as PPV23, 0 as PCV7, v.chartID, max(rs1.dateService) as dateService from dbo.tbl1 v,
(select distinct dateService, chartID, procedureKey from fhc.dbo.tbl1 where (datePart(year,dateService)=@yr and datePart(month,dateService)=@mon) and (procedureKey='90657' or procedureKey='90658')) as rs1
where (v.chartID=rs1.chartID) and (v.procedureKey=rs1.procedureKey) and
(case when @mon=1 then dateDiff(month,dateService,@myDate)< 216
when @mon=2 then dateDiff(month,dateService,@myDate)<244
when @mon=3 then dateDiff(month,dateService,@myDate)<275
when @mon=4 then dateDiff(month,dateService,@myDate)<305
when @mon=5 then dateDiff(month,dateService,@myDate)<336
when @mon=6 then dateDiff(month,dateService,@myDate)<366
when @mon=7 then dateDiff(month,dateService,@myDate)<32
when @mon=8 then dateDiff(month,dateService,@myDate)<63
when @mon=9 then dateDiff(month,dateService,@myDate)<93
when @mon=10 then dateDiff(month,dateService,@myDate)<124
when @mon=11 then dateDiff(month,dateService,@myDate)<154
when @mon=12 then dateDiff(month,dateService,@myDate)<185
end) group by v.chartID, rs1.procedureKey
View 3 Replies
View Related
Aug 10, 2004
Hello
I want to put a case statement into a where clause but it's not working. Can anybody help, or tell me a better way of doing this
Thanks very much
declare @param varchar (100)
select @param = 'mytext
select
colA
,colB
,colC
from
mytable
where
(case
when @param is null then colA = 'group'
else colA = 'single'
end)
View 3 Replies
View Related
Mar 15, 2007
i have wrote a query which compares two tables, returning anywhere the qty is not the same in each table:
(simple ex)
Select order_no
from table1
inner join table2
on table1.order_no = table2.order_no
group by order_no
having table1.Qty<> table2.Qty
BUT... I need to add a table3, where there maybe (or may not be enters - thus a left join). If there is an entry in table3 then use qty in table3 and not table1... so having becomes:
CASE WHEN table1.Qty<> table3.Qty
THEN table3.Qty<> table2.Qty
ELSE table1.Qty<> table2.Qty END
but how do i actually write this?
View 3 Replies
View Related
Apr 17, 2008
I need to have a CASE statement inside a WHERE clause. Is this possible? Here is my WEHRE clause. Any suggestions are appreciated:
WHERE
--r.pBOM_ID=d.fEngr_BOM_ID and
r.fItem_ID=a.pEngr_Item_ID and
r.level<=@v_level+1 and
case when @v_showrootlevel=1 then r.level>1 else r.level>1 end
order by r.pID
View 3 Replies
View Related
May 8, 2008
I am trying to create a condition if the value of a parameter is null then pass a certain WHERE condition to my query. I keep on getting this error:
Line 15: Incorrect syntax near '='.
this is my query that lies on a PROC:
SELECT count(a.pEngr_Item_ID) as assembly_count FROM Engr_Item a
INNER JOIN Engr_BOM_Control b
ON a.pEngr_Item_ID=b.fEngr_Item_ID
WHERE
b.Bill_Type=@v_Bill_Type and
a.Item_No=@v_Item_No and
case when @v_Rev_Lett is not null then a.Item_No=@v_Rev_Lett else a.Item_No=@v_Rev_Lett end
View 6 Replies
View Related
Oct 13, 2006
If you could help me with my syntax i would really appreciateit. I'm trying to change the where clause on the fly, but it'sgiving me a syntax error.Hopefully from what I have below you can tell what i'm afterthe first part should evaluate a boolean expression, then if true,search using one field, otherwisesearch using a different fieldWHERECase WHEN @myCompany = 933THEN tblClient.companycode = 933 --problem lineELSEtblCase.clientcode = @myClient --problem lineENDAnd tblCase.status = 'Active'thank you!!
View 9 Replies
View Related
Jul 20, 2005
Can anyone tell me if it's possible to use a Case statement in a Whereclause, and if so, the proper syntax?J.R.Largo SQL ToolsThe Finest Collection of SQL Tools Availablehttp://www.largosqltools.com
View 2 Replies
View Related
May 16, 2006
Is it possible to use CASE within a WHERE?
I have a query which is something like this, but it returns an error:
SELECT * FROM tablex
WHERE
CASE WHEN 'sexec' IS NOT NULL THEN
dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' and dm_sexec LIKE 'sexec' ELSE
dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' END
GROUP BY dm_marque
In this case sexec is a form parameter, if something is passed then I need to include it in the where statement, if it isn't I need to include something else. I am using CASE because there are three of these parameters and I want it to stop evaluating as soon as it matches as more than one may match but I only want to apply one.
Many thanks
Karen
View 3 Replies
View Related
Aug 8, 2006
Hi all,
I am passing in a variable into a CASE statement. Based on the value, I want to return a set of values in an IN clause. Here is an example:
(The where clause will use a field called 'Location')
DECLARE @strTest as Varchar(50)
SET @strTest = 'HI'
SELECT * FROM [SomeTable]
WHERE
CASE @strTest
WHEN 'HI' THEN Location IN('1', '2', '3')
END
ORDER BY Location
Is this possible to do?
Sanctos
View 1 Replies
View Related
Mar 13, 2008
Hi
I've been trying to put a simple case statement into my 'where' clause but having no luck, is there another way to do the following?
DECLARE @searchCriteria Int
SET @searchCriteria = 2
SELECT column1, column2 FROM TABLE WHERE
CASE @searchCriteria
WHEN 1 THEN (column3 = 1000100)
WHEN 2 THEN (column3 = 1000101)
END CASE
...cheers
View 14 Replies
View Related
Jun 5, 2015
I have a population split between two vendors. One gets last names between A and R, the other the rest. Now, on a given date vendor 1 gets everybody.
I can accomplish this with a case statement on the upper range (R or Z), but it seems I should be able to do this without testing at all after the turnover date.
A small bit of the code:
declare @get_date datetime = convert(char(10),getdate(),101)
select top 10 pt.pt_id, pt.last_name
fromsmsmir.mir_acct a join smsmir.mir_pt pt on (a.src_sys_id = pt.src_sys_id
and a.pt_id = pt.pt_id
and a.from_file_ind = pt.from_file_ind
[Code] ....
Seems I should be able to not test the last name after the turnover date, but I can't figure out how.
View 2 Replies
View Related
Sep 25, 2007
Greetings,
After many hours search many forums and many failed experiments, I figure it's time to turn to the experts.
I need to execute a query that changes the returned data based upon a parameter's value. In my example below, the lob field contains both text values and nulls.
SELECT uniqueID, lob, xdate
FROM mytable
WHERE
CASE WHEN @myparam = 'ALL'
THEN
xdate >= '2007-09-01'
ELSE
xdate >= '2007-09-01' or
lob = @myparm
END
I've experimented with various forms of the LIKE function, checking for null/not null and keep coming up blank.
I thought about using an IF statement and creating different versions of the entire statement, however, in real-life I need to do this with four fields using four parameters (one for each field). The permutations are a little too much.
Any ideas?
Rob
View 8 Replies
View Related
Oct 29, 2015
I cannot seem to find the syntax to combine IN + CASE in a WHERE clause
WHERE
ses.BK_MS_SESSION <= '2015-03'
AND vis.CAT_DRAW_STATUS =
(CASE ses.BK_MS_SESSION
WHEN '2015-03' THEN vis.CAT_DRAW_STATUS
ELSE
CASE stat.BK_MS_VISIT_STATUS
WHEN 'T' THEN 'X'
ELSE vis.CAT_DRAW_STATUS
END
END
) IN ('D','R')
View 7 Replies
View Related
Jun 3, 2008
I am working on a Function that takes multiple parameters. I have a query that populates a temporary table, and then it processes some logic. My question is, if the parameter is passed as null, I dont want the query to be affected by this null value. Rather, I would like to not pass it at all to the query. So if the parameter is NULL, dont pass it through the query. I have the following but its not compiling right:
SELECT bom.pEngr_BOM_ID , bom.fEngr_Item_ID, det.pEngr_BOM_Detail_ID, 1, bom.Bill_Type, bom.Rev_Ltr, bom.Series_Ltr
FROM dbo.Engr_BOM_Control bom WITH (nolock)
INNER JOIN dbo.Engr_BOM_Detail det WITH (nolock)
ON det.fEngr_BOM_ID=bom.pEngr_BOM_ID
WHERE bom.pEngr_BOM_ID=@v_pEngr_BOM_ID
AND det.fEngr_BOM_ID=@v_pEngr_BOM_ID
CASE WHEN @v_Bill_Type IS NOT NULL THEN
AND bom.Bill_Type=@v_Bill_Type
END
View 3 Replies
View Related
Sep 24, 2015
For Below example when @x=1 to retrieve col>0 rows or all rows.
With out another if else blocks or Dynamic sql to solve only in where clause.
select 0 col into #x
union
select 1 col
union
select 2 col
declare @x INT =1
SELECT * FROM #x
where col>CASE WHEN @x=1 THEN 0 ELSE (col=col) END
--here in case i want to compare only when @x=1 then col>0 other wise select all rows with out filter
View 5 Replies
View Related
May 20, 2004
When I created a CASE statement (This is at work, Pat:)) it is about 30-40 lines long. I gave it a name and set the name = to the case statement:
ie,
SELECT fieldname1 =
CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END
, fieldname2
, fieldname3
FROM tablename1
GROUP BY CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END, , fieldname2, fieldname3
etc.
The long CASE statement in my GROUP BY is awkward to me. Is this the only way to do it? I tried using the fieldname1 but it comes back as an invalid field name and asks for the "expression".
Regards,
Dave
View 5 Replies
View Related
Feb 18, 2010
I am trying to determine the existence of at least one row in my Detail table using EXISTS in my SELECT list from my Main table.SELECT M.ID,EXISTS(SELECT 1 FROM Detail D WHERE D.ID = M.ID) as HasDataFROM Main MCan this be done this way?I was hoping that using EXISTS would find a row and move on thus increasing performance.
View 15 Replies
View Related
Aug 21, 2014
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff
@filter1 varchar(100) = '',
@filter2 varchar(100) = ''
AS
BEGIN
SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
View 5 Replies
View Related
Jul 31, 2015
I have a table that has for each shop a value that can change over time.For example
BK_POS 1 --> Segment A
BK_POS 1 --> Segment /
What I would like to achieve is to get all distinct Shops (BK_POS) from the table above, but if for that specific pos a row exists where the segment = "/" then I do not want to take this BK_POS in my select query.More concrete, the for example above I do not want to select BK_POS 1 because he has one row where the segment = "/".
View 3 Replies
View Related
Sep 25, 2015
I've been beating my head against this for a bit and haven't been able to figure this out I want to pull 1 set of values between a date time range if @Report = '1' but if @Report = 2 or 3 I want it to drop 3 of the parameters so it will pull all items. by dropping the where parameters for @BeginRangeDate and @LookOutDate and L.COLineStatus. My report works great if I go in and run Report 1 with the date parameters in the where statement and also works great for Reports 2, 3 if I REM out those 3 items in the Where statement. Here is what I currently have
CASE@Report
WHEN'1'THEN
WHEREL.RequestedShipDate>=@BeginRangeDate
ANDL.RequestedShipDate<=@LookoutDate
ANDDO.ForecastDate>=@ForecastDate
[Code] .....
View 7 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
