Acer Aspire 5943G upgraded from Win 7 to 10, Kaspersky 2015.
After tolerating a couple of glitches (track pad not scrolling, right speaker down, tiles at start menu not displayed, some icons not visable on task bar) I can now not boot up. The windows 10 logo appears with a rotating 'we'll get there sometime' device for a short while, after which the screen flickers black then grey/blue. It does not reach sign in, there is no cursor and it stays this way, although it will shut down ready for me to try again. I have tried hitting F8 during this but with no effect. F2 brings up set up, but how I can get back in to it?
I have a problem with my Acer Aspire 5943G. I just upgraded from Windows 7 Home Premium OA to Windows 10 Home, and then updated Windows 10 until there were no updates showing. A couple problems appeared which I was able to fix but not a particular one; When I startup the laptop it all goes smoothly but when it gets to the login screen (clock with the background), my screen's backlight suddenly turns off.
I can still see the faint screen info if I shine a bright light in it. If I restart it, it fixes the problem though. This is rather frustrating as I cannot expect when it will happen (right now it happened when I turned it on from hibernation, sometimes it happens with a normal shutdown and startup). My GPU is ATI mobility radeon HD 5650. Also having a sound issue. I can get the sound to work through headphones, but not through the speakers.
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
Acer Aspire XC-603 computer came with Windows 8.1 ... Upgraded to Windows 10 Home around March 1, 2016 Version 1511 OS Build 10586.164 ... First crash came the next day after the upgrade, then around every two weeks.
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
I have an Acer Aspire laptop that used to have Bluetooth on it. I just recently noticed that all evidence of Bluetooth has disappeared from the OS. The Bluetooth module that I am using is:
Bluetooth 4.0 + HS, the two drivers listed on the support portal for my model number are an Atheros Wifi/BT combo and a Broadcom. I can't tell since there since the OS doesn't see it.
First thing I tried is to download and install both drivers from the manufacture's site (Acer Support). Both installers did not detect the BT module being present and ended prematurely.
I've got a problem with my second laptop, acer aspire e15-551P. After I upgraded my windows to 10, voice totally disappeared also sound card cannot be found. Already downloaded and installed all available drivers from acer site. Still doesn't work.
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
I have an Acer Aspire 7750g laptop for like 5 years now. Updating it's graphics card would result in having lines randomly flicker all over the screen horizontally. This is the reason I did not update it's drivers. Now that Windows 10 has released, it seems to have update it automatically which is irritating. I've searched in the internet some ways to fix it and tried one of them: Underclock the Memory Clock by 50 MHz in MSI Afterburner. This did not work at all. What I have done is I have underclocked the Core Clock by 50 MHz aswell and still no result. I've kept these two that way and restarted my laptop to hope that this might fix it, I was wrong. Now I can't even boot into windows. This is what I get when I try to boot into Windows: [URL]
I have tried going into safe mode and that's where I get the BSOD that says Kernel_Data_Inpage_Error. I have also enabled the low-resolution video mode, still no result.What I could do is reinstall the operating system but I'd like to keep that as my last option as I do not want to lose my files and I don't know if my windows 7 key will be accepted while installing windows 10 from a flashdrive.
I recently upgraded to Windows 10 without a problem, but after a while I thought; why not do a clean install? I went ahead and tried to perform a clean install from the windows 10 settings, and chose all drives, and a quick reset.
It then started the process, after which it crashed with a BSOD telling me something went wrong and that it would restart. After that it kept restarting, sometimes with a BSOD, sometimes just freezing on the windows 10 logo. There were different BSOD errors each time it would crash, I can't remember all of them.
Some of them were along the lines of a driver stack overrun, some were telling me system32/winload didn't exist.
We tried a system restore from USB, but there was no difference. We tried going into the BIOS menu, sometimes it worked, sometimes it froze, and we made sure that the USB would be the first the PC would boot from. Still no difference.
At this point the PC just froze on the windows logo, still trying to initialize the system reset I think. I unplugged the drives and plugged them into my laptop to check what was wrong, and both drives were wiped, with nothing left, no hidden files.
Only with both drives unplugged, the PC would give me something different, an error saying that there is no operating system, which is obvious, so I don't think it's the PC, but windows that is generating this problem.
I tried booting from USB multiple times, with a system restore on it, a windows 10 installation on it, and a windows 8.1 installation on it, since that is what my PC started with.
Installed win 10 with no problems and it has been running successfully for a good while. Recently I have had some booting problems, not all the time but every so often the boot sits there with a black screen showing ACER and nothing happens. If you sit long enough it will boot with no other problems. I tried looking at the boot section and switched it to normal as it was on something else which I cannot remember.
After installing windows 10 on my asus laptop yesterday, last night I tried to wipe my laptop by resetting it, i left it at 1% before i went to bed and this morning it was still at 1% so i did a force turn off and when i turned it back on , it got stuck in a boot up loop where it would just keep on restarting [URL].
Safe mode doesn't work, nothing works, except the power button. What should i do? i didn't want to bring it to asus because the warranty expired 2 months ago.
laptop specs- Toshiba satellite C55t series Touch Screen 4gb RAM 500 gb HDD Intel HD graphics. WIndows 10 home
I bought my laptop some 2 months ago and reset it a month ago cause of some minor problem. After the reset it was working pretty good and i downloaded games and other stuff. THen yesterday night i realised that after my built in Toshiba service apps had been uninstalled after the reset, so went download and install them from the official site and the suitable versions. I think i download too many of them at the same time and installed, so after 5 minutes it got hung. I pressed Ctrl+Alt+Del. After that the screen went black and i hit the power button to shut down. Then after that switched it on and there it said under toshiba logo that automatic repair was taking place and diagonising your pc, and took me directly to that bue Boot Menu. There i tried stuffs like restart, turn off and ultimately came to resetting giving up the rest. When i pressed reset it look good till 36% then after that it said "There was a problem Resetting your PC".
After this i went to this site- [URL].... And did only Method 1 cause for doing method 2 I cant get into my windows.
I keep having trouble with my laptop it hasn't been even starting up in weeks, I turn it on and this it's black with a blue window that sus Default Boot Device missing or Boot Failed, insert recovery media or hit any key
Then select boot manager to choose a new boot device or to boot recovery media. So I hit enter and I go to boot manager and boot option menu but there's no options....
My laptop was being weird at work one day so I rebooted. I had windows ten for probably two weeks. when it went to boot agian it got stuck on the windows boot animation. My bios options were limited and the only thing i could do was revert to windows seven through some windows ten recovery menu. Once i got back to windows 7 it still didnt boot. I re installed windows seven and then tried to go back to windows ten. Once i got to windows ten it tried to boot but failed. I rebooted it a couple times to see what would happen and it reveerted back to windows seven automatically. Now windows seven won't boot either.
Searching about the issue online, it seems that this can be caused by norton or iCloud software, or two Microsoft background services that you have to disable in MSconfig to stop the screen flashing. I don't have norton or iCloud, and I disabled the two services. Still happening. Can't find anything else online that mentions how to fix this. Also apparently for most people the flashing doesn't start until they've reached the desktop already, whereas for me it starts before I can even do anything. PC completely unusable.
So I started my pc today and my window search didn't work anymore, just blank no results and everything felt very slow. so i restarted into safe mode without network and now it restarted asking for my windows login which is linked to my email. But i have no network so its not logging in. i have tried f8 when restarting but don't get any options to choose which boot mode you want as you could in windows 7.
I am trying to create usb windows 10 recover/install on my other laptop but its failing.
I built myself a new computer recently and it boots fine if I am booting into the bios. However when booting off my thumbdrive to install windows 10 it boot loops, getting the the windows symbol and then restarting.
The most recent update has bricked my PC and I am stuck on the boot up screen, I have tried pressing F8 on boot up but don't get the option to reset it, what to do?