Installation :: Clean Install Acer Aspire V5 573g - Error Code 0x800701E3
Aug 21, 2015
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 Replies
Similar Messages:
Jan 21, 2016
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 Replies
Aug 17, 2015
Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
View 1 Replies
Jul 30, 2015
I have an Acer Aspire 7750g laptop for like 5 years now. Updating it's graphics card would result in having lines randomly flicker all over the screen horizontally. This is the reason I did not update it's drivers. Now that Windows 10 has released, it seems to have update it automatically which is irritating. I've searched in the internet some ways to fix it and tried one of them: Underclock the Memory Clock by 50 MHz in MSI Afterburner. This did not work at all. What I have done is I have underclocked the Core Clock by 50 MHz aswell and still no result. I've kept these two that way and restarted my laptop to hope that this might fix it, I was wrong. Now I can't even boot into windows. This is what I get when I try to boot into Windows: [URL]
I have tried going into safe mode and that's where I get the BSOD that says Kernel_Data_Inpage_Error. I have also enabled the low-resolution video mode, still no result.What I could do is reinstall the operating system but I'd like to keep that as my last option as I do not want to lose my files and I don't know if my windows 7 key will be accepted while installing windows 10 from a flashdrive.
View 1 Replies
Aug 15, 2015
I worked with my friend install windows 10 on his desktop pc. but after installation, it wont boot, rather showing bsod error 0xc000021a, we have tried reinstalling for a couple of times, but the error persisted. BTW, the previous os was windows 7. We deleted the previous OS's partition and installed it there, but it seems like nothing happened.
View 1 Replies
Sep 23, 2015
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
View 8 Replies
Jul 29, 2015
I did a clean install of Windows 10 Pro x64 using the method that everyone knows about by now that was written up on various sites today i.e.:
Ran the Media Creation Tool and upgraded my copy of Window 8.1 Professional with Windows 10 Professional. Looked in Control Panel --> System and it said my copy of Windows was activated. Then I ran the Media Creation Tool again and downloaded the ISO. Burned ISO to DVD. Restarted computer, booted into Windows installer on DVD, customized the install by formatting drive, did a fresh install of Windows 10.
Now when I go into Control Panel --> System it says "Windows not activated". When I click on the Activate Windows icon and click the error details link I get the error code: 0xC004C003.
I should note that the Windows 8 OS came pre-installed on my laptop which I bought brand new. I don't think that matters?
View 24 Replies
Aug 9, 2015
When I try to upgrade Windows 8.1 with Bing tablet to Windows 10 in Windows update i get Error Code 8007003 in preparing to install phase.
When choosing try again it re downloads everything and same error appears.
I tried cleaning Windows Update files and running troubleshooter but it doesn't work.
If I try to upgrade from windows 10 home ISO will my activation be fine.
View 5 Replies
Oct 15, 2015
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
all that's plugged in is the ssd, monitor, ram, and keyboard/mouse
View 1 Replies
Nov 7, 2015
Acer Aspire 5943G upgraded from Win 7 to 10, Kaspersky 2015.
After tolerating a couple of glitches (track pad not scrolling, right speaker down, tiles at start menu not displayed, some icons not visable on task bar) I can now not boot up. The windows 10 logo appears with a rotating 'we'll get there sometime' device for a short while, after which the screen flickers black then grey/blue. It does not reach sign in, there is no cursor and it stays this way, although it will shut down ready for me to try again. I have tried hitting F8 during this but with no effect. F2 brings up set up, but how I can get back in to it?
View 11 Replies
Aug 14, 2015
My Laptop will not sleep. It's an Acer Aspire 5250 Series Laptop. Below is the screenshot of the issues that I have ran and found from Command Prompt.
View 9 Replies
Mar 27, 2016
Acer Aspire XC-603 computer came with Windows 8.1 ... Upgraded to Windows 10 Home around March 1, 2016 Version 1511 OS Build 10586.164 ... First crash came the next day after the upgrade, then around every two weeks.
View 1 Replies
Aug 15, 2015
I set the screen sleepmode to 2 minutes and that works but 1 minute after that the computer goes in to sleepmode. Why?
View 1 Replies
Sep 23, 2015
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
View 3 Replies
Oct 1, 2015
I am trying to do a clean install of windows 10 on a new SSD on an HP Pavillion purchased in 2009 or 2010. I am booting from a DVD. All is going well in the beginning of the install. I get past the product key verification and partition section. Once it starts copying the windows file during the install it has been giving me the following error message and stopping the install:
"Windows cannot install required files. The file does not exist. Make sure all files required for installation are available and restart the installation. Error code: 0x80070003."
It has made it to different percentages of copying files before it gives me the error. Once I believe it made it almost to 100% and then gave me the error.
I have since re-downloaded the ISO twice onto different discs with no success. Have called microsoft support with no success. Tried booting from USB but the computer does not seem to support it. Tried updating bios but no newer versions were available.
View 4 Replies
Nov 18, 2015
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
19.0.9.7 is the synaptics version
touchpad works fine on other user accounts
View 9 Replies
Jul 30, 2015
I have a problem with my Acer Aspire 5943G. I just upgraded from Windows 7 Home Premium OA to Windows 10 Home, and then updated Windows 10 until there were no updates showing. A couple problems appeared which I was able to fix but not a particular one; When I startup the laptop it all goes smoothly but when it gets to the login screen (clock with the background), my screen's backlight suddenly turns off.
I can still see the faint screen info if I shine a bright light in it. If I restart it, it fixes the problem though. This is rather frustrating as I cannot expect when it will happen (right now it happened when I turned it on from hibernation, sometimes it happens with a normal shutdown and startup). My GPU is ATI mobility radeon HD 5650. Also having a sound issue. I can get the sound to work through headphones, but not through the speakers.
View 6 Replies
Jan 10, 2016
I have an Acer Aspire laptop that used to have Bluetooth on it. I just recently noticed that all evidence of Bluetooth has disappeared from the OS. The Bluetooth module that I am using is:
Bluetooth 4.0 + HS, the two drivers listed on the support portal for my model number are an Atheros Wifi/BT combo and a Broadcom. I can't tell since there since the OS doesn't see it.
First thing I tried is to download and install both drivers from the manufacture's site (Acer Support). Both installers did not detect the BT module being present and ended prematurely.
View 1 Replies
Dec 3, 2015
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
View 1 Replies
May 30, 2015
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
View 9 Replies
Dec 17, 2015
I've got a problem with my second laptop, acer aspire e15-551P. After I upgraded my windows to 10, voice totally disappeared also sound card cannot be found. Already downloaded and installed all available drivers from acer site. Still doesn't work.
View 6 Replies
Oct 3, 2015
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
DESKTOP-CS4PJG9-Sat_10_03_2015_121137_66.zip
View 6 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Aug 12, 2015
Just found myself diggin' more and more in bugs and troubles in Windows 10. Now, when I'm looking for updates with Windows Update it shows me that the Updates cannot install and to check it out later, and then gives me an error code: 0x800705b4.
I don't know how to fix this, I have been looking for this error code in the gigant sea of the Internet but nothing. I'm growing tired of Windows 10 Mountains of Bugs. I know it's still not finish and it's never ever gonna be finish, but this is just too much, adding that I'm with the people who cannot download/update apps from the Store and cannot open the Mail/Calendar/OneNote apps.
View 5 Replies
Jan 3, 2016
For some reason Windows 10 keeps failing to install updates every time, worse yet it won't give an error code .
View 1 Replies
Jan 22, 2016
I bought new parts on 14th of Jan (i5 6600k, Asus Maximus VIII Gene, Corsair Vengeance LPX 2x4gb 3600 mHz). Swapped them with my old i5 760, Gigabyte motherboard and 8gb RAM.
The day after I installed my new components, Windows prompted me to activate Windows (apparently a new motherboard counts as a new computer thus a new license required). I ignored it, installed all the new drivers for my motherboard and CPU (Realtek worked fine BTW). 2 days later I couldn't stand the "Activate Windows" thingy at the bottom of my screen, so I decided so sacrifice my money to Microsoft to buy another license of Windows 8.1 Pro.
Installed Windows 8.1 Pro via USB (erased all data on SSD first) and upgraded to Win 10 from there.
So there I was on a clean Win 10. Used Ninite to install most common Apps, and went over to my motherboard's driver page over on ASUS's website. Downloaded the Realtek Audio Driver from there ((4.35) 6.0.1.7629), and tried to install it.
While I find the Realtek installer really outdated and janky, it normally works. The installer showed up and began extracting all sorts of files (mostly .dll files), the big blue window in the back popped up and after a while the message "InstallShield Wizard is installing..." popped up. It was then when I received the message: "Install Realtek HD Audio Driver Failure !! [Error Code : 0xE0000234".
So it's listed between Programs and Features, and I can also find it in the Device Manager, Under "Other Devices" as "Unknown Device". When I double click that the status reports:
---------------------------------------------------------------------------
The drivers for this device are not installed. (Code 28)
Driver is not intended for this platform.
To find a driver for this device, click Update Driver.
----------------------------------------------------------------------------
Clicked "update driver", manually searched for the drivers in the extracted setup folder, didn't work.
View 1 Replies